Description
Fast, reliable, and intelligent – the ultimate DC charging solution for public and commercial fleets.
The SOLNET 60kW DC Fast Charger (ENC-DCL060A/B) delivers high-power direct current charging for all modern EVs. With a wide output range of 200–1000V, it’s ready for today’s 400V EVs and tomorrow’s 800V architectures. Choose between single or dual gun configurations to maximize station throughput.
⚡ Key Features
-
60kW output power – fast charging for all EV types
-
1 or 2 outputs – single or dual gun configuration
-
Wide voltage range – DC 200–1000V (800V ready)
-
Max current – up to 250A
-
High efficiency – ≥95% at nominal output power
-
Power factor – ≥0.99 (full load)
-
12-inch color touchscreen – 800×480 resolution
-
Nuclear safety grade power module platform – ultra-reliable
-
Advanced digital current sharing – high accuracy & anti-interference
-
Module dormancy & rotation technology – system efficiency optimization
-
Multiple charging modes – automatic, by time, by energy, by cost
-
Real-time display – charged quantity, time, pricing, status
-
Hot plug-in technology – easy maintenance
-
Emergency stop switch – built-in
-
IP54 rated – outdoor weather-resistant
-
Forced air cooling – reliable thermal management
-
OCPP 1.6 protocol – seamless CMS integration
-
Multiple communication options – Ethernet / 3G / 4G / WiFi (optional)
🎯 Applicable Scenes
| Scene | Application |
|---|---|
| 🚌 City bus charging stations | Overnight and opportunity charging |
| 🚕 Taxi depots | Quick turnaround between shifts |
| 🚚 Logistics & delivery fleets | Fast charging for commercial vans |
| 🗑️ Sanitation & utility vehicles | Municipal fleet operations |
| 🅿️ Public charging stations | Urban parking lots & plazas |
| 🏢 Shopping centers | Attract EV-driving customers |
| 🏘️ Residential districts | Shared community fast charging |
| 🛣️ Intercity highways | Critical fast-charging infrastructure |
| 🔌 Limited-space sites | Compact footprint, maximum power |
“Especially suitable for fast charging situations such as charging stations on intercity expressways where DC is needed, particularly in cases of limited sites.”
📦 Technical Specifications
| Parameter | Details |
|---|---|
| Charger Capacity | 60kW |
| Model No. | ENC-DCL060A / ENC-DCL060B |
| Input System | Three-Phase, 5 Wire AC |
| Input Voltage | AC380V ±15% / AC260–530V |
| Input Frequency | 45–65Hz |
| Output Type | DC 200–1000V |
| Number of Outputs | 1 or 2 (optional) |
| Max Output Current | 250A |
| Converter Efficiency | ≥95% at nominal output power |
| Power Factor | ≥0.99 (full load) |
| Operating Temp | -25°C to +55°C |
| Humidity | 5–95% |
| Storage Temp | -40°C to +70°C |
| IP Rating | IP54 |
| Cooling | Forced air cooled |
| Mechanical Stability | As per IEC 61851-1 Section 11.11.2 |
| Connector Compatibility | IEC 62196, IEC 61851, CCS-2 |
| Display | 12-inch touch screen (800×480) |
| Emergency Stop | Supported |
| User Authentication | QR Code / RFID Card / Password Login |
| Metering | Consumption units, grid-responsive |
| Communication | OCPP 1.6 + Ethernet/3G/4G/WiFi (optional) |
🛡️ Protection Functions
-
✅ Electrical isolation – input to output
-
✅ Reverse current prevention – battery to charger filter capacitor
-
✅ Inrush current prevention – when connecting battery pack
-
✅ Over current protection
-
✅ Under voltage protection
-
✅ Residual current protection
-
✅ Surge protection
-
✅ Leakage protection
-
✅ Short circuit protection
-
✅ Over temperature protection
-
✅ Voltage withstand & insulation grade – meets all standards
-
✅ EMC compliant
📐 Physical Dimensions & Installation
| Item | Specification |
|---|---|
| Cabinet Footprint | 700 × 450 mm |
| Concrete Foundation | Recommended 793 × 551 mm |
| Foundation Height | ≥200 mm |
| Cable Inlet | Bottom entry |
| Reserved Cable Length | ≥700 mm |
| Installation Method | Floor-mounted (ground) |
| Recommended Transport | Forklift |
Installation checklist (included):
| Item | Quantity |
|---|---|
| Ground-mounted DC EV Charger | 1 |
| Testing cards | 2 |
| Installation Instructions | 1 |
| Qualification Certificate | 1 |
| Expansion screws | 4 |
Cable requirement (not included):
-
Cross-sectional area of DC input phase line, N line, and ground line: ≥35mm²
🖥️ Operation Interface
Display Area Instructions:
| Button | Function |
|---|---|
| 0–9 | Number input |
| Confirm | Confirm operation |
| Return | Return to previous interface |
| Delete | Delete input box contents |
| Cancel | Cancel operation |
Charging Modes:
| Mode | Description |
|---|---|
| 1. Automatic charging | Smart charge until full |
| 2. Charging by amount | Set currency limit |
| 3. Charging by energy | Set kWh limit |
| 4. Charging by time | Set duration limit |
Authentication Methods:
-
Password login (with verification code)
-
RFID card swipe
-
QR code scan (via APP)
⚙️ System Setup Menu (Professional Access)
| Setting | Description |
|---|---|
| Network settings | IP address & port |
| Charger settings | Consult technical personnel |
| Protection settings | Over/under voltage, current, temperature |
| Rate settings | Time-of-use pricing |
| Module settings | Charging module information |
| Energy meter settings | Meter parameters |
| RFID card settings | Card & password management |
| Time settings | System time |
| Charging record | History query |
| Event record | All system events |
| Charger testing | Gun testing |
| Password settings | System password change |
📦 What’s Included
| Item | Quantity |
|---|---|
| ENC-DCL060A/B charger cabinet | 1 |
| CCS-2 connector(s) | 1 or 2 |
| Testing cards | 2 |
| Installation Instructions | 1 |
| Qualification Certificate | 1 |
| Expansion screws | 4 |
🔧 Maintenance Requirements
-
✅ Fix charger with anchor bolts – prevent tilting/vibration
-
✅ Install shelter for outdoor units (shading & rain protection)
-
✅ Regularly check bolt tightness & wire connections
-
✅ Check for short circuits
-
✅ Verify emergency stop button functionality
-
✅ Ensure lightning protection & effective grounding
-
✅ Operate within nominal voltage/current for maximum efficiency
-
✅ After use: stop charging → wrap cable → return to holster
⚠️ Non-professionals are strictly forbidden to disassemble equipment components.
🚚 Storage & Transportation
| Parameter | Requirement |
|---|---|
| Packing | Solid wooden box |
| Storage temp | -25°C to +55°C |
| Storage humidity | <80% |
| Storage environment | Dry, clean, ventilated, no corrosive gases |
| Upside down | Prohibited |
| Vibration/bumping | Avoid – use tightening measures |
| Post-delivery | Inspect for damage immediately |
Reviews
There are no reviews yet.